Showing posts with label for me. Show all posts
Showing posts with label for me. Show all posts

Thursday, January 1, 2015

Travel bag

Project - Travel Bag, my own design
Started - Around May 2014
Finished - June 2014

We headed off to Fiji for a week at the end of June.

I really wanted a travel bag that would have pockets to keep the passports and travel documents safe but handy. I wanted it small enough to prevent carting too much stuff around with me, but large enough to keep the essentials contained in one place.
I couldn't find anything I wanted in local shops and did some web searches and found a few bag patterns that were cross body style with multiple zip pockets, but they were all smaller or larger than I was looking for.

I grabbed some paper, jotted down the ideas I liked and then started sketching.
I came up with a design I liked, dug some fabric from the stash and got creating.

The outer fabric is Ikea upholstery weight fabric (stash), the lining is a green shiny remnant that has been used for lots of things (stash), the zips are chunky open-ended ones purchased specifically from Lincraft and the bag rings and slide adjuster are from Voodoo Rabbit. I also used a heavy weight interfacing from the stash.

I ended up with a rectangular satchel, with a single adjustable strap, so it could be cross-body or shoulder-bag style.

There is an external zip pocket for tissues, sunscreen, panadol, room keys and other small bits.
Behind the zip pocket is a slip pocket big enough to hold a magazine or ipad.

The top of the bag has a recessed zippered gusset.

Inside the bag on the rear side there is a zippered pocket on one side that extends the depth of the bag. This was designed to hold the passports and travel documents.

Inside on the front side is a slip pocket divided into three, to hold my mobile phone, a pen and a notepad. I could tuck my sunglasses in them as well.

The bag is large enough to hold a water bottle, my wallet, hairbrush and a few other small things if required.

Good things:
I loved the external pockets. They were great for stashing things like room charge receipts.
The inner pockets kept everything organised and the small size meant I wasn't overloaded with stuff because we simply couldn't take it in the first place.


Bad things:
The strap and rectangular bag rings didn't work so well. The strap was a bit on the short side for comfort, and the bag rings slipped sideways causing the strap to gather. I'd make a longer, wider strap next time, with an extra layer of interfacing, and round bag rings.


 
I wasn't overly fussed on the fabric I used. I think a denim or unisex print would be more my style, and might mean that the males in the family would be happy to carry it when necessary.

 I've kept the diagrams and directions that I wrote out as I made it, in case I want to make another one.

I would probably make the sides a bit deeper next time, and play with the strap - possibly a fixed length strap rather than adjustable.

I was pretty happy with this bag. It served us well on our trip, and after a good wash it has gone into rotation with my every-day bags.

Note - white fabric is not a good choice for a bag!





Monday, December 29, 2014

KTB - New Look 6429 Mock-wrap Dress

Project - New Look 6429 view D. Knit dress with mock wrap detail.
Started - Who knows? Probably about 4 years ago.
Finished - 28 December 2014

This dress has been sitting in the sewing cupboard for years. It needed the hem to be unpicked, reshaped and resewn, dangling threads removed and floppy facings fixed.

The fabric is a really stretchy jersey knit I picked up on special but is really too stretchy to hold the shape of the dress well. A firmer knit would hold the design lines much more effectively. The fabric pattern was difficult to match and you can see that it is printed off-grain, so the front panel looks like it is hanging skewed.

I remember that I got most of the dress put together in a day or two but wasn't happy with the fit so shelved it.
I remember pulling it out again and adjusting the wrap front and sewing the hem, only to put it on and be dismayed to find the back hem had a big dip at the centre back and the skirt was too clingy and revealing over my stomach and hips. I stashed it away to deal with later.

This week, seeing as the sewing machines were out, the room was tidy and I was on a bit of a roll, I decided to pull it out and finish it off once and for all.

I figured out that the droopy hem was because I had lengthened the back bodice but forgotten to remove the same amount of length from the back skirt. Over-locking before folding up a hem wasn't the greatest idea on this fabric either. I unpicked the zig-zag hem, lay it out flat and trimmed the entire hem using the rotary cutter. I pinned them hem up, pressed well and then stitched in place with a twin needle.

The facings didn't sit well (an issue with everyone who has reviewed this pattern) so I trimmed them back to the edge of the top-stitching, creating more of a bound edge.

All in all, the dress isn't a disaster. it is light and comfortable to wear, so may become a round-the-house dress.

I don't like the cling across my stomach but that is more about accepting my body shape than a design fault with the pattern.

I love the back - the v-shaped waist line sits perfectly. I'm wondering if I can combine the back design with a more fitted front bodice?




Sunday, December 28, 2014

Rainy Holiday sewing - knit dress

Project - New Look 6280 View A - knit dress with 'V' neck and bust gathers
Started - 27 December 2014
Finished - 28 December 2014

I purchased this fabric and pattern in November just before my quilt weekend, intending to get it started - at least cut out and ready to sew. As usual I took far too much with me and this didn't even get a look in.

Post Christmas, with an empty, tidy house and a grey rainy day, what else is there to do but pull it out and sew while the boys are flaked out in front of the TV?

The fabric is a fairly firm knit with one-way stretch. It isn't the colour I would normally wear but fine for trying out the pattern to see if it fitted and if I liked it.

The lining was a stretchy jersey. All up, the fabric I used cost around $17 and the pattern was $6.


I've been looking for summer dresses for a while, but everything I try on is either shapeless or far too small in the bust. I bought this pattern hoping I could adjust it for a custom fit.
I tried out a Full Bust Adjustment using this tutorial from 'Gertie's New Blog for Better Sewing'.
I used my high bust measurement and the finished garment dimensions from the pattern tissue to select the size to use.

My full bust measurement is 8cm larger than my high bust so I needed to add 4cm width and length to each side of the bodice. This would have been easier if the shoulder line and bust apex were marked on the pattern.

I guessed and ended up too full through the high bust. I could probably get away with a smaller increase but it is lovely to put on something that doesn't pull over the bust and that has an under-bust seam that sits exactly where it should.

I made view A from the pattern but altered the front bodice to have a vertical centre seam rather than a cross-over neckline, as there was enough bulk from the gathers under the bust. I should have dropped the neckline lower as it ended up higher than I wanted.

I sewed the bodice pieces with a smaller seam allowance (by mistake) so the straps ended up too wide and the underarms too high. There was also some bagging on the centre bust seam caused by the incorrect seam allowance. I added a piece of elastic to the front bust seam to gather the excess fabric and pull the 'V' down a bit lower. I think I attached the straps a little too high, so it sits a bit strange over my back. Using the correct seam allowance and getting someone else to help place the straps correctly should fix all these issues on any future dresses.

I picked a size with less than the recommended ease around the hips, and when I make it again I will go bigger through the hips for a looser skirt, especially if I make a maxi version.


The result is a comfortable summer dress. I'll make more of these, but with the changes I mentioned above. I've already been scouting out fabrics online.

Saturday, February 1, 2014

KTB - Portfolio dress

Project: Voile Lisette Portfolio Dress
Started: November or December 2012?
Finished: 27 January 2014

A while ago the Lisette Portfolio dress was popping up every where in blog-land. I took one look at the design and went 'Nah - not for me'. Gathers over the bust, no hip, bust or waist shaping. I just thought it would look like a sack on me.
Later I saw a few versions that really appealed so I got the pattern and then it sat, and sat and sat.
Last summer I had a long break and was looking for some light summer dresses that would double as work wear. I had some voile (or lawn...something like that) and thought I could try a wearable muslin.
Matching the patterns required a lot of careful measuring and pinning before I even cut the fabric.
I got it all cut out, got the front together and fussed around with fancy top stitching that disappeared into the print. I got the back together and pin basted the dress together for fitting. That is as far as I got.
I didn't like it and debated cutting it into a skirt. I made up a skirt in a similar weight fabric to check sizing for a yoke, but cut a size too small.
Gave up, shoved it all in a bag and put it on a shelf.

Fast-forward a year and I had a free evening and wanted something quick and easy to play with and found this on the shelf. I sewed the front and back together, tried it on and was happy enough with the fit so decide to finish it off and see how it went.
In a few hours over two nights I got it finished.
The fit at the front is fine and I love the pockets although they disappear into the busy fabric, and I'm still not fussed over the gathers. The back was a bit sack-like so I added some darts to shape it to my waist.
The colour of the fabric combined with the loose, A-line style remind me of a school uniform.
The fabric has a bit of cross-grain stretch so it is comfortable to wear and it is nice and light.
It is hanging in the wardrobe at the moment and I'll wear it some time this week to decide if I keep it or donate it.

Thursday, January 2, 2014

March 2013 - Panel Bag for bag challenge

Back In March someone suggest a bag challenge. I had a pattern and fabric sitting in the stash ready to go so I jumped straight on it.
 
The pattern is the Panel Bag by 'You Sew Girl' and I used a light denim from the stash as the main fabric. I think I had used the same denim in a kids clothing swap a few years ago. I wanted to use a grey fabric instead, but decided to go with the dark side of the denim after taking a few photos. The feature fabric was a fat quarter of an oriental print that came in a grab-bag of fat quarters that was one of my earliest purchases of quilting fabric.
 
 
The lining fabric was leftover from the backing of my big star quilt. I had pellon and interfacing in the stash, but decided that the silver bag rings wouldn't work and got some rectangular antique brass ones instead. The rings and a fancy zip were the only things I needed to buy to make it.
 
 

The bag was a fairly easy make - really clear instructions in the pattern and a walking foot helped get through the multiple layers.
I wasn't overly fussed with the pocket construction (probably because my lining fabric was fairly flimsy) but they have held up much better than expected, so I would probably do them the same way next time. The picture on the right shows a slip pocket that is divided into three compartments. Each is big enough to hold my Samsung Galaxy phone and they are handy for phone, sunnies and notebook and pen - the stuff you need to find quickly and don't want disappearing into the depths...

 
 
And here is the finished bag. It has become my everyday bag and I pretty much take it everywhere.
It is big enough to hold colouring book and pencils when we go out for dinner, as well as my normal wallet, phone, brush, make-up purse, water bottle and 'stuff' that stays in my bag for work. The straps are wide and comfortable on the shoulder and it is structured enough to keep the shape but still be soft and flexible.


Saturday, January 10, 2009

A bag for me


Just finished my margaret bag from here - http://http://www.ohfransson.com/oh_fransson/2008/11/margaret-sling-bag.html I made the cross-body style.
The fabric I used is a furnishing weight from Ikea and instead of the interfacing and interlining I used a single layer of thin iron-on pellon. The button is covered with the same fabric, fussy cut to use the seed pod design.
I added a key clip and incresed the size of the pleat slightly but otherwise followed the pattern.
I'll give it a test drive over the next few days, but found the pattern really easy.